DM7000 Basic Cardiac Monitor Defibrillator

Features & Specifications:Defibrillator:Waveform: BiphasicCharge Time: Less than 7 seconds with a new fully charged batteryEnergy Display: Monitor display indicates both selected and delivered energy.Charge Prompt Type: Voice and visual prompts.Impedance Range: 0-250 ohms.ECG Monitoring:Patient Connection: 3-lead ECG cable, or 5-lead ECG cable, paddles.Lead Selection: Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, VECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm/mV displayed on monitor.Heart Rate: 20-300BPM.Heart Rate Alarm: On/Off displayed on monitor, user-selectable.Smart Alarms: Beeper/voice prompts indicate shockable rhythm.Battery:Type: Rechargeable, Ni-MH battery, 12V.Operating Time: For a new, fully charged battery: 100 defibrillator discharges, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions.Display:Screen Type: High-resolution displayScreen Size: 7 inch (17.7 cm) diagonallySweep Speed: 25mm/secInformation: Heart Rate, Lead/Pads, Alarm On/Off, SpO2, NiBP, AED Functions and Prompts, Alarm Selection and Limits, Delivered Energy.Recorder:Paper: 50mm thermal.Speed: 12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay.Printing Method: High-resolution, thermal print headPrint-out Modes: Manual or automatic, user-configurable.On/Off Control: Front panel and paddle.Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge.AED Mode:AED Function: Auto analyse and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts.Shockable Rhythms: Ventricular fibrillation with amplitude >=200uV, ventricular tachycardia with rates >=140bpm, and QRS complex wave duration >=140msCharge Control: Control on device front panel, press key on paddle.Prompts: Voice and visual prompts.